How to solve the leakage problem of hydraulic adapters？

The problem of hydraulic adapter oil leakage may be caused by multiple reasons, and the solution will depend on the specific cause and location of the oil leakage. The following are some common methods to solve the problem of hydraulic adapter oil leakage：

1.Check the sealing:

Ensure that the threads and O’ring sealing of the adapters are in the correct position and tightened.

Check for damaged gaskets, sealing rings, or O-rings and replace them in a timely manner.

Correct lubrication:

Use appropriate lubricants to ensure that the sealing ring maintains good sealing performance during operation.

2.Correct installation:

Ensure that the adapters are installed correctly and should not be twisted, deformed, or damaged by external forces.

Use the correct torque value to tighten the adapters to ensure secure installation.

3.Check pressure：

Check if the working pressure of the hydraulic system exceeds the rated working pressure of the adapters, as excessive pressure may cause damage to the sealing ring.

4.Check the sealing ring：

Check the sealing ring or O-ring of the hydraulic adapters for cracks, aging, or wear. If there are any problems, they should be replaced in a timely manner.

5.Cleaning hydraulic adapter：

Ensure that the adapters and surrounding areas are kept clean to prevent dust, dirt, or impurities from entering the hydraulic system.

6.Using hydraulic sealing agent：

Before inspecting and repairing oil leakage issues, hydraulic sealing agents can be used to temporarily seal oil leakage points to prevent hydraulic system shutdown.

Upgrading or replacing connectors：

If the oil leakage problem cannot be solved through maintenance and repair, it may be necessary to consider replacing or upgrading the adapters.

Please note that the hydraulic system is complex and oil leakage issues may require careful inspection and repair, preferably handled by experienced hydraulic technicians. In addition, ensure that all safety regulations are followed during hydraulic system maintenance and repairs to prevent accidents from occurring. If unsure how to handle the problem, it is recommended to consult a professional hydraulic engineer or technician.

NINGBO NJ adapter factory specializes in the production of various of fittings, including SAE, Metric, and BSP adapters. The products are produced by automated machines, with a production capacity of up to 10 container per month. During the production process of the product, the products are inspected and quality are strictly controlled. The factory has over 40000 inventory, and all products are 100% inspected. The products are exported to countries such as Europe and America and Canada with almost no complaints.

Welcome customers to visit our factory and you will know more about us.