How to Weld Hydraulic Fittings？

If the technical is not good for welding and will have the leak problem. NJ factory will provide how to solve this issue as below.

Welding hydraulic fittings can be accomplished safely with the right tools and techniques. 

1、Before you begin to welding, the working area should clean, dry and free from flammable materials. Remove all dust, dirt or debris from the work surface, and make sure you have all the necessary equipment. This includes a welding machine, ware helmet, gloves and protective clothing. 

2、There are different welding processes to choose from, including TIG, MIG, and stick welding. 

3、The material you choose will depend on the material of the hydraulic fitting you are welding. 

4、Set up your welding machine according to the manufacturer's instructions. Make you have the correct settings for the type of material you are welding and the size of the filler rod you will be using.

5、Before welding, clean the fittings thoroughly using a wire brush or sandpaper. remove any dirt, rust or corrosion that may will effect welding process.

6、Position the fittings so that they are held securely in place. Use a clamp or other holding device to ensure they do not move during welding. 

7、 After the weld has cooled, review it for any defects. 

8、After welding and inspecting, test the fittings to ensure they function correctly. It will know the hydraulic system are correct and will find leaks or other problems